Absen A27 Plus — cabinet grid & viewing distance

Pixel pitch is the number that drives everything else on this preset. At 2.97 mm, cabinet count and native resolution are fixed the moment the wall footprint is set, and the same 2.97 mm figure sets the optimal viewing band for video content at roughly 3-5.9 m (pitch x 1.0 to x 2.0). The 15 m default closest seat sits comfortably beyond that band, which is normal for a large outdoor screen viewed from a distance rather than a close-approach lobby or retail wall.

6,500 nits is a direct-sunlight brightness figure, which is the relevant comparison for an outdoor Outdoor-category cabinet — indoor nit ratings are not a fair comparison here. Front-service access means cabinets can be maintained from the viewing side without rear crawl space, useful where the wall backs onto a wall or structure. Rental trim (flight-case ready, quick-lock frames) fits temporary event and touring deployments rather than a permanently fixed installation. At 2016 x 1176 (~2.4 MP) native, the wall suits broadcast and video content rather than dense text or fine UI graphics.

Drag the wall width and height in the calculator to see the cabinet grid and native resolution recompute live. Because cabinets are a fixed 500 x 500 mm module, the calculator snaps to whole cabinets — so the actual wall it returns (here, 6 x 3.5 m) may differ slightly from the target you typed (6 x 3.375 m). That rounding is expected and is exactly what a vendor would quote.

The calculator does not decide structural or rigging load (outdoor walls carry wind-load and dead-load engineering beyond this tool's scope), the power and data cable run from processor to cabinets, processor or scaler selection for the video source, how content resolution maps onto the native 2016 x 1176 canvas, or ambient-light calibration for changing daylight conditions outdoors.