— LED Wall · Hospitality Lobby
Hotel lobby video wall — 4 × 2 m, 2.5 mm pitch
Problem. A premium hotel lobby wants a 4 × 2 m video wall for brand storytelling viewable from 4–8 m as guests circulate.
Answer. At ~5 m minimum viewing distance, a 2.5 mm pixel pitch resolves to crisp imagery without visible pixel structure. The calculator confirms cabinet count, resolution and electrical load.
02 / In depth
How this preset reads — the engineering view.
Indoor LED wall sizing is a pitch-vs-distance trade. The rule of thumb is 1 mm pitch per 1 m of minimum viewing distance — meaning a 2.5 mm pitch is comfortable at 2.5 m and crisp at 5 m. Lobbies typically pull viewers no closer than 3–4 m due to circulation and seating layout.
This preset configures a 4 × 2 m wall (1600 × 800 mm at 2.5 mm pitch gives 1600 × 800 native, very close to FHD vertically scaled) with cabinets selected against the chosen pitch. The calculator returns cabinet quantity, native resolution and approximate electrical load — three numbers the M&E and AV teams need before any cable is pulled.
Pitch decision: 2.5 mm is the sweet spot for lobbies of this size. Step down to 1.9 mm if guests approach within 2 m (concierge desk, lift lobby); step up to 3.9 mm if the wall is only viewed from across a 10+ m atrium.
Engineering notes the calculator can't decide for you: content management system (a separate decision — BrightSign, Magicinfo, Q-SYS, Resolume), structural mount + service access (cabinets need rear or front service depending on the product line), and the source switching and warm-spare pathway for a 24/7 hospitality install.
What this preset deliberately does not solve
- Pixel pitch decision is viewing-distance-led; over-spec wastes capex, under-spec creates pixel structure.
- Power and electrical load are nominal — real BOQs add 30 % safety margin and check phase balancing.
- Content management system choice is independent of the wall size.
How this preset differs from its siblings
The stage-backdrop sibling preset is sized for a broadcast audience and a fixed seating geometry — pitch decisions account for camera moiré and scan-rate compatibility. This preset is the always-on hospitality wall: passive viewers at variable distances, pitch decision driven only by minimum viewing distance, no broadcast camera in the room. The walls are also a different size category — this lobby wall is smaller in both dimensions and slightly tighter pitch, because hospitality viewers approach closer than a conference audience.
03 / Hydrated calculator
Try the configuration — live.
The calculator below is preloaded with this preset’s state. Adjust any input — your URL stays shareable.
— Calculator · LED wall size
The wall built cabinet by cabinet.
Pick a brand, model, wall dimensions and viewing distance. Cabinet count, native resolution, power, weight and feasibility flags resolve in real time. Sources cited.
Cabinets
32
8 across × 4 down
Native resolution
1600 × 800
1.3 megapixels
Actual wall
4.00 m × 2.00 m
8.0 m² · cabinet-snap
A planning link — not a quote.
- model
- Leyard CarbonLight CLF-2.5 — P2.5
- pitch
- P2.50 mm
- brightness
- 1,500 nits
- refresh
- 3,840 Hz
- viewing
- 2.50 m – 5.00 m optimal
- weight
- 224 kg
- power
- avg 1.60 kW · peak 4.80 kW
Carbon-fibre cabinet — light, stage-rental friendly. 1500-nit brightness suits live events with stage lighting.
Indicative cabinet build for shortlisting — confirm structure, power and processing against a site survey before ordering.
What changes this estimate
- Actual viewing distances in the room
- Pixel pitch availability in the chosen series
- Content type (data, video, fine text)
- Mounting structure & cabinet dimensions
A planning link — not a quote.
· Other presets for led wall size calculator
LED Wall · Corporate Stage
Conference stage backdrop — 6 × 3 m, 2.6 mm pitch
A 6 × 3 m stage backdrop for hybrid conferences needs to read clearly on stage and on broadcast camera without moiré.
LED Wall · Fine-pitch indoor
Samsung The Wall IWA (P1.68) — cabinet grid & viewing distance
A controlled indoor space wants a 4 x 2.25 m video wall built from Samsung The Wall IWA (P1.68) fine-pitch cabinets, and needs to know how the cabinet grid, native resolution and closest comfortable seat resolve before the wall is specified. The decision hinges on how tightly a 1.68 mm pitch can be viewed and how many cabinets the target wall actually needs.
LED Wall · All-in-one
Samsung The Wall All-in-One IWA: cabinet grid & viewing distance
A 3.6 x 2.03 m (16:9) wall is a common starting point for a boardroom or lobby display, but the right cabinet grid and closest-seat distance depend on the specific product's pixel pitch and packaging. This preset works through that sizing for the Samsung The Wall All-in-One IWA, an all-in-one, front-service cabinet at 1.68 mm pixel pitch.
LED Wall · Fine-pitch indoor
LG MAGNIT LSAB (P0.9) cabinet grid & viewing distance
A 4 x 2.25 m video wall in a controlled indoor space needs a cabinet grid that lands close to the target dimensions without odd part-cabinet edges. At 0.9375 mm pixel pitch, the sizing decision also has to keep the closest seat far enough back that individual pixels disappear into a clean image.
LED Wall · Fine-pitch Indoor
LG MAGNIT LSAA (P1.5) — cabinet grid & viewing distance
A 4 x 2.25 m indoor video wall (16:9) needs a fine-pitch cabinet that stays sharp for viewers as close as 1.6-3 m without the cabinet grid or native resolution becoming a guessing game before procurement.
LED Wall · Fine-pitch indoor
Leyard DirectLight X (P1.2) — cabinet grid & viewing distance
A fine-pitch indoor LED wall needs a cabinet grid and viewing envelope that match the room, not just a target width and height. At a 4 × 2.25 m (16:9) wall, the decision is how the DirectLight X's 1.27 mm pitch maps to cabinet count, native resolution and the distance at which the closest seat can sit.
LED Wall · Mid-pitch indoor
Leyard CarbonLight CLF-2.5 cabinet grid & viewing distance
A 5 x 2.8 m indoor wall needs a cabinet layout that lands close to the target size without odd part-cabinet edges, and a closest-seat distance that keeps the pixel structure invisible rather than a visible grid. Getting both right up front avoids a re-order once the cabinet count and viewing zone are fixed on site.
LED Wall · Fine-pitch indoor
Absen N1.5 Pro cabinet grid & viewing distance
A fine-pitch indoor wall built from Absen N1.5 Pro cabinets needs its cabinet grid and native resolution confirmed before layout is locked, and its closest comfortable seat needs checking against the cabinet's 1.56 mm pitch. A 4 x 2.25 m (16:9) target is the common starting footprint for this class of wall.
LED Wall · Outdoor
Absen A27 Plus — cabinet grid & viewing distance
An outdoor screen at 6 x 3.375 m (16:9) needs a cabinet grid that lands close to the target size without odd fractional cabinets at the edges, and a viewing distance where the pitch reads clean rather than pixelated. For direct-sun outdoor use the brightness budget also has to be settled alongside the size decision, not after it.
LED Wall · Fine-pitch indoor
Unilumin UMiniIII 1.2 — cabinet grid & viewing distance
A 4 × 2.25 m indoor video wall needs a fine-pitch cabinet that stays crisp for viewers who won't stand back far — corporate lobbies, control rooms and boardrooms typically watch from inside 3 m. The sizing question is which cabinet grid actually fits the target wall and what native resolution that grid delivers before any content or mounting decision is made.
LED Wall · Outdoor
Unilumin Upad IV 2.6 preset: cabinet grid & viewing distance
A 6 x 3.375 m (16:9) outdoor wall built from the Unilumin Upad IV 2.6 has to resolve to a whole number of cabinets, which shifts the actual finished size away from the target dimensions. The real sizing decision is working out that cabinet grid and its native resolution before committing to a footprint, and confirming the closest seat sits inside the pitch's optimal viewing band rather than too close for the content to resolve cleanly.
LED Wall · Fine-pitch indoor
Christie Velvet Apex II 1.5: cabinet grid & viewing distance
A 4 x 2.25 m (16:9) indoor wall needs a cabinet layout that lands close to the target size without the calculator quietly rounding away the difference. Christie Velvet Apex II 1.5, at 1.56 mm pixel pitch, resolves this by snapping the requested area to a whole-cabinet grid and reporting the actual built dimensions and native resolution alongside it.
LED Wall · Fine-pitch Indoor
Barco XT 1.5 — cabinet grid & viewing distance, 4 × 2.25 m
A controlled indoor space wants a 4 × 2.25 m (16:9) video wall built from Barco XT 1.5 cabinets, and needs to know the resulting cabinet grid, actual wall size and native resolution before committing to a mount plan.
LED Wall · Broadcast / rental
ROE Visual Black Pearl BP2V2 — cabinet grid & viewing distance
A production team specifying a 5 x 3 m Black Pearl BP2V2 wall needs the exact cabinet grid, native resolution and optimal camera-to-wall viewing band before confirming a rental order.
LED Wall · Fine-pitch indoor
ROE Visual Ruby RB1.5: cabinet grid & viewing distance
A 4 x 2.25 m (16:9) wall built from ROE Visual Ruby RB1.5 cabinets must resolve to a whole number of cabinets in each direction, so the finished wall is rarely the exact target size. The real design decision is how the cabinet grid, actual wall dimensions, and native resolution settle out, and whether the intended closest-seat distance sits inside this pitch's optimal viewing band.
LED Wall · Fine-pitch indoor
INFiLED DB Series P1.9 — cabinet grid & viewing distance
A 4 × 2.25 m indoor video wall needs a fine-pitch cabinet that stays crisp for viewers who may approach within a few metres, without over-specifying beyond what the room requires. The INFiLED DB Series P1.9's 500 mm cabinet module has to tile cleanly across that footprint while the pitch is checked against the intended closest-seat distance.
LED Wall · Outdoor
Daktronics DVN Outdoor P6.6 — cabinet grid & viewing distance
An outdoor video wall sized at roughly 6 x 3.375 m (16:9) needs a cabinet grid that lands on whole cabinets and a pitch that reads clearly from the intended viewing distance in direct sunlight. Daktronics DVN Outdoor P6.6 is a 6.6 mm outdoor cabinet rated to 6500 nits, and this preset checks how it resolves against that target wall.
LED Wall · Fine-pitch indoor
Planar TVF Series P1.5 — cabinet grid & viewing distance
A controlled indoor environment wants a 4 x 2.25 m (16:9) video wall built from Planar TVF Series P1.5 cabinets, and needs to know how many cabinets are needed, what the actual finished wall size will be, and how close viewers can sit before pixel structure becomes visible.
LED Wall · Fine-pitch indoor
Sony Crystal LED BH P1.5 — cabinet grid & viewing distance
A fine-pitch indoor wall built from Sony Crystal LED BH P1.5 cabinets needs a defensible cabinet grid before anyone commits to a 4 x 2.25 m (16:9) opening, since fine-pitch panels are sized and priced by the cabinet, not the metre.
· Next
Brief us on the project — with this configuration.
Presets are a typology starting point. The brief wizard captures the room geometry, programme and constraints we need to translate this configuration into a real design.